- Model NO.: QDZ9301XLC
- Drive Wheel: 4WD
- Trademark: Sinotruck
- Load Capacity: 30T
- Type: Semi
- Origin: China
1. DIMENSIONS & WEIGHTS
Overall length x Breadth x Height: 12240 x2460 x 1500 mm.
Fifth wheel height: 1, 300 mm.
Front overhand: 470 mm.
1.2 Weights and loads
Max. Payload: 35, 000 kg.
Tare Weight approx.: 4520 kg
2. RUNNING GEAR
2.1 Suspension System:
FUWA mechanical tandem suspension capacity 2× 14T, with 6 x 8 plate springs, 16mm thickness and 90mm width
FUWA axles 2 × 13T with drum brakes S-Cam 420× 200
8.0V-20, 10 holes for tube tyres 12.00-20; Made in China
Triangle tire, 12.00-20, 14 units, made in China
2.5 King pin
Forged steel, 2", welded in
2.6 Landing Gear
Jost 19", 2 speed, 24T lifting capacity
Designed to carry 1 x 40 ft, or 1 x 20 ft., or 2 x 20 ft...Provided with 12 Nos. Retractable type Multilock twist locks
3.1 Main Beams
500mm height, Low Alloy (Q345 ) by automatic submerged arc welding; Top Flange 14mm, Botton Flange 16mm, Middle Flange 6mm.
3.2 Surface preparation & painting:
On completion of fabrication, all steel parts are steel blasted to to SA 2.5, then Two Synthetic Enamel Finish Paint, Single color as per customer's choice
4. LIGHT SYSTEM:
Standard electrical equipment 24V with rear lights on bumper, electric connection type SEA 7 poles mounted on the front bearer.
5. BRAKE SYSTEM:
WABCO relay emergency valve indirectly to two tank system (No ABS system).
SPARE WHEEL HOLDER(WINCH)
RUBBER MUD FLAPS BEHIND REAR WHEEL.
7. COLOUR: Yellow
Thanks a lot for paying our great attentions to our Company. I'm Levana from Sinotruk Qingdao Heavy Industry Co. Ltd
I would like to take this opportunity to introduce our company to you very briefly. Sinotruk Qingdao Heavy Industry Co. Ltd is one of the wholly owned subsidiaries of China National Heavy Duty Truck Corp., Ltd. It is one of the biggest special truck R&D, manufacturing and exporting base in China. A bountiful supply of spare parts, considerate after-sales services, abundant technical strength can provide timely and satisfaction service for the overseas users.
|1||Corner post front||CORTEN A|
|Corner post rear|
|Front sill & header|
|Door sill & header|
|Front & rear header protector|
|Load transfer member|
|Top & bottom side rail|
|Gooseneck tunnel & bolster|
|2||Door & roof & side panel||MGSS|
|Side stringer & Roof bow|
|Clip on device angle|
|3||Door & side lining||HGSS|
|Generator fitting nut|
|Lining front top & side|
|6||Floor rail & Floor stringer||6061-T6|
|7||Door locking gear||Forged steel||HDG|
|9||Rear corner post inner||SS50|
|10||Insulation tape||Electrolytic buffer of P. E. or P. V. C.|
|11||Foam tape||Adhesive of P. V. C.|
|12||Insulation foam||Rigid polyurethane Foam 2) Blowing agent: R141b (HCFC)|
|13||Exposed sealant||MS (inner) Silicone (outer)|